Background:
User: Harbin Institute of Technology
The materials science research of this laboratory ranks among the top 0.1% globally. It mainly focuses on the research in the field of chemical films
Instrument: ZEISS Supra55
Field emission scanning electron microscopes for high-quality imaging and advanced analysis
Vibration isolation solution supplier: Unicon Technology Co., LTD
+ Professional environmental solution provider
Professional research institution service provider
+ Table Stable Active vibration isolation system supplier
Description
The laboratory is located on the 7th floor of the building and the external environment is rather complex. Multiple research rooms are placed side by side on the same floor, with a high density of people and goods coming and going. The distance from the elevator shaft to the SEM tube is only about 12 meters. Meanwhile, right beneath the building is a busy main road. There is a subway network beneath the main road, and there is a subway entrance directly beneath the laboratory building. These main vibration sources will conduct considerable vibrations to the tube of the electron microscope, affecting its ability to capture images normally.
The Supra55 integrates an air cushion inside, providing excellent shock absorption within the frequency range of 25Hz to 40Hz. The main purpose is to slow down the high-frequency mechanical vibrations generated inside the electron microscope, but it cannot eliminate the low-frequency vibrations from the ground.
The high-performance active vibration isolation system can perform active vibration reduction within the range of 0.7Hz to 200Hz, thereby providing a stable environment for the electron microscope and enhancing the quality of the captured images.
Floor plan of the 7th floor of the building
Step 1: Lift the electron microscope as a whole
Step 2: Place the vibration isolation system
Step 3: Connect the lines and adjust the load
Step 4: Start using
Installation time: Approximately 1 hour
Required tools: Special lifting system for electron microscopes & Adjustable wrench & Hex socket wrench &" Special open-end wrench
Data display
http://localhost/metinfo6/product/showproduct.php?id=55
Image display
300,000 times - Image obtained when the elevator is in operation vs. 300,000 times - image obtained when the elevator is in operation and actively isolated
The image obtained after active vibration isolation
Advantage
"High cost performance"
Highly compatible with electron microscopes
Miniaturization, suitable for personalized requirements
The module is expandable
+ Does not increase the horizontal space of the electron microscope
The ultra-thin design increases the center of gravity of the electron microscope by only 110mm
It is easy to install and debug, and no foreign engineers are required for installation
+ Low maintenance costs
+ Domestic prototype trial and demonstration
Official Account
Service Support
